Timecode calculator

How many frames is a timecode, and how long is one frame? Convert timecode to frames, milliseconds and real time at 23.976, 25, 29.97 drop-frame and other rates, add or subtract timecodes, or move one to another frame rate.

I have
HH:MM:SS:FF. Drop-frame uses a semicolon before the frames.

Timecode

01:00:00;00

Frames

107,892

Real time

00:59:59.996

Milliseconds

3,599,996.4

One frame

33.367 ms · exactly 30000/1001 fps

Drop-frame skips 108 frame numbers an hour, so the timecode stays in step with the clock. No frames are dropped.

Frame rates and frame durations

Frame rateExact rateOne frameDrop-frameTypical use
23.976 fps24000/100141.708 msNoFilms and series for streaming and 60 Hz TV
24 fps2441.667 msNoCinema
25 fps2540.000 msNoTV in Europe, Australia and other 50 Hz regions
29.97 fps30000/100133.367 msYes, optionalTV in the US, Japan, Brazil and other 60 Hz regions
30 fps3033.333 msNoPhones, screen recordings, web video
50 fps5020.000 msNoSports and live HD TV in 50 Hz regions
59.94 fps60000/100116.683 msYes, optionalHD TV in 60 Hz regions
60 fps6016.667 msNoGames, screen recordings, phones at 60 fps

One frame in milliseconds = 1000 ÷ frame rate. Drop-frame timecode exists only for 29.97 and 59.94 fps.

Need subtitles and chapters for the video?

In Kinescope, AI generates subtitles on the video page in the video’s language, together with chapters. You review them, publish, and viewers turn them on in the player.

  • Automatic subtitles on the Super plan, from €10 a month
  • 100 minutes and 200 GB of traffic a month free
  • No card required

What the calculator does

Timecode to frames and back

Type a timecode, a frame count, real time or milliseconds, and get the other three. Short input works too: 1:30:00 is read as 1 minute 30 seconds, frame 00.

Drop-frame 29.97 and 59.94

Drop-frame timecode skips frame numbers at the start of each minute, except every tenth one. The calculator handles the skipped numbers and tells you when a timecode doesn’t exist.

One frame in milliseconds

The length of one frame at the chosen rate, from 41.708 ms at 23.976 fps to 16.667 ms at 60 fps, and the exact rate as a fraction, such as 30000/1001.

Real time for subtitles

Players and subtitle files count in hours, minutes, seconds and milliseconds. Real time gives the value for a VTT or SRT cue, the format that video transcription exports.

Add and subtract

Add a duration to a timecode or find the length between two timecodes. The second value can be a timecode or a plain number of frames.

Change frame rate

Move a timecode to another rate. Keep real time to retime subtitles for a re-encoded file, or keep the frame count to see what a 23.976 to 25 fps speed-up does to duration.

FAQ

Can’t find the answer you need? Check out our Subtitles from video.

Timecode is a frame address in the format HH:MM:SS:FF: hours, minutes, seconds and the frame within that second. Editors, cameras and subtitle tools use it to point to an exact frame. The frame part depends on the frame rate: at 25 fps it goes from 00 to 24, at 29.97 fps from 00 to 29.

To convert timecode to frames, multiply the hours, minutes and seconds in seconds by the frame rate and add the frames. At 25 fps, 00:01:10:12 is 70 × 25 + 12 = 1,762 frames. Drop-frame timecode needs a correction for the skipped numbers, which the calculator above applies.

Drop-frame timecode is a way of numbering frames at 29.97 and 59.94 fps so that the timecode matches the clock. At 29.97 fps it skips frame numbers 00 and 01 at the start of every minute except each tenth minute, 108 numbers an hour. No video frames are removed. Drop-frame timecode is written with a semicolon: 01:00:00;00.

Broadcast TV in 60 Hz regions runs at 29.97 fps because color NTSC slowed the original 30 fps by 1000/1001 to avoid interference between the color and sound signals. Digital TV and most cameras kept the rate. The exact value is 30000/1001 fps.